As you sip your coffee and intend to finish your pending office work early in the morning, you found you cannot access your WiFi. As you take your laptop in the kitchen thinking that you might get a strong WiFi signal there, the connection again disappoints you. This can be really frustrating in case of any emergency. There should always be a backup plan so that you have internet access whenever you need it. If you are looking for such suggestions that can make the backup plan, then you have landed on the right page.
Learn the technical tweaks:
Did you know that routers have channels? If you and your neighbor use WiFi connection you may both be trying to use the same channel and eventually degrade the wireless signal. To prevent such a situation you can use inSSIDer or WiFi Stumbler to find the least trafficked and best channel for your router to operate.
Your router may work slowly depending on its age. Upgrade an older g or b router to N router to extend its range at a relatively reasonable cost. N router can handle physical and electrical signal interference much better than g and b and this may help you to get a better range. Wireless N technology improves the design of radios and antennas built into the network hardware. The signal range also help to better reach and maintain more reliable connections with devices further away from your house. Moreover, they can even operate on signal frequencies outside the band used by non-networked consumer gadgets thereby minimizing the radio interference outside the house.
Recommended for YouWebcast: A Week in the Life of an Agile Creative Team
All wireless N routers support dual-band 802.11n that can operate at either 2.4 GHz or 5 GHz bands. 2.4 GHz is better for travelling through the walls. Therefore, if you have wireless N router, make sure it is set to use 2.4 GHz instead of 5 GHz.
Move the router to a better location:
Some people enjoy wireless connection at first but later find that their network crashes when a cordless phone or microwave is turned on. It’s simple; the majority of the wireless users do not realize that the location of router can make a difference. Besides the central location which is considered as the best position, you need to look into other factors such as height of the router. The higher your router is placed on a shelf or cabinet the less is the physical interference it is likely to encounter.
Moreover, you can also move the router to the best possible location to take the benefits of open spaces and door-way instead of walls and corners. Furniture, appliances and walls weaken the signal substantially but airwaves make the wireless move smoothly. Therefore, scoot your router away from anything that cause interference such as cordless phones, television, gaming console, microwaves, fluorescent lights or elevators.
Investing in network extension option:
If you have not heard about WiFi repeater, it is high time that you learn about it. Repeater if placed within range of your existing WiFi router can extend your wireless signal. It will even relay the signal out to hard- to-reach locations around your house or office. They can theoretically double the wireless range.
To extend the internet coverage, Powerline networking uses the electrical wiring in your house. It helps you connect to the internet either in your back room or connect your gaming console to an old TV. However, before you start with the Powerline adapter set up, make sure to stick with only one manufacturer instead of many while buying the equipment. This will help you to avoid any compatibility issues.
Increase wireless network security:
Users often consider their wireless network set up a success when internet connection and the basic file sharing are functional. However, they forget about the proper security features that often are not in place. Following these basic checklists will help to improve the security of your home wireless network-
Change the default administrator password and username
Turn on WPA/WEP encryption
Change the default SSID
Enable MAC address filtering
Disable SSID broadcast
Do not auto-connect to open WiFi networks
Assign static IP addresses to devices
Enable firewall to each computer and the router